Merlin PULSAR150, Instruction Manual

Page: 6 / 60

4
Transmitter
Your Merlin Transmitter is an advanced controller designed for the beginner to be easy to use and tune. You will
need to follow the steps below to ensure you prepare the controller correctly for use and understand the adjustment
possibilities available.
Transmitter Controls
Preparing the transmitter
Insert the aerial into the
hole and turn clockwise
until it is tightly secured.
Make sure you never over
extend the aerial as this
will cause it to break. Open the battery holding
tray to expose the empty
battery slots. Insert 8 AA
batteries into the marked
spaces. Please note the
correct direction of the
batteries
Incorrect battery insertion
could lead to damage
1. Aerial
2. Throttle Trim
3. Cyclic L/R Trim
4. Cyclic F/B Trim
5. Throttle Stick
6. Cyclic Control Stick
7. Power Switch
8. Battery level indicator
9. Rudder reverse switch
10. Aileron reverse switch
11. Throttle reverse switch
12. Elevator reverse switch
13. Frequency Crystal
14. Rudder Trim
1
4
7
2
3
5
6
10 8 12 11 9 13
14