background image

Index

1. Introduction ............................................................................1

2.  Service guide ...........................................................................1

2.1.  How to replace or repair the seat assembly ................................................ 1

2.1.1. 

To replace the seat body ................................................................................... 1

2.1.2. 

To replace the seat base plate assembly ............................................................ 3

2.1.3. 

To replace the seat tower assembly ................................................................... 3

2.1.4. 

To replace the left/right armrest ........................................................................ 5

2.2.  How to replace or repair the body assembly .............................................. 6

2.2.1. 

To replace the shroud ....................................................................................... 6

2.2.2. 

To replace the footplate assembly ..................................................................... 6

2.2.3. 

To replace the anti-tipper wheel assembly ........................................................ 7

2.2.4. 

To replace the caster wheel assembly................................................................ 8

2.2.5. 

To replace the driver wheel assembly ............................................................... 9

2.2.6. 

To replace the frame assembly........................................................................ 11

The numbers shown in this service manual is just for reference. The part
numbers should be in accordance with current exploded drawing.

Summary of Contents for P710 series
















Reviews: