Intended for V-tail aircaft,V-tail mixing
allows the ruddervators to operate both
as rudders and elevators.The same as
the other mixes,V-tail mixing requires
that each ruddervator be operated by a
separate servo.
*If necessary,use the Servo Reversing
function to achieve the correct direction
of servo throws.
*If necessary,use the Servo Reversing
function to achieve the correct direction
of servo throws.
V-tail Mixing
Intended for tailless,“flying wing” models such
as delta wings and flying wings,elevon mixing
mixes channel 1 (aileron) to channel 2 (eleva
tor) allowing the elevons to operate in unison
(as elevators) or in opposition (as ailerons).
This function requires that each elevon be
operated by a separate servo.
Delta Wing Mixing
CH1
CH2
The direction of movement for any of the four channels can be reversed elec
tronically
。
To change the direction of movement for each main channel
：
1.Switch off the TX power switch
。
2.Press and hold one specific trim button for the channel to be reversed
。
CH1 right trim button for CH1 reversing.
CH2 down trim button for CH2 reversing.
CH3 high trim button for CH3 reversing.
CH4 right trim button for CH4 reversing.
3.Switch the TX power switch on
，
the GREEN LED should flash then steady
on to indicate the movement for that channel has been reversed
。
4.Repeat steps 1-3 to reverse the direction of any other channel as needed
。
SERVO REVERSING
