COPYRIGHT © 2006 MERIT ENTERTAINMENT
Instructions
Cables and Jumpers
Obtain one shielded audio cable long enough to reach between the input device (FM radio,
TV, tape player, etc.) and the amplifier accessory board.
This configuration requires all three jumpers supplied with the accessory board. Connect
these jumpers between:
1.
J9 (LEFT CH POWER AMP INPUT) and J14 (INVERTER OUTPUT).
2.
J13 (RIGHT CH POWER AMP INPUT) and J20 (RIGHT CH PREAMP OUTPUT).
3.
J11 (INVERTER INPUT) and J16 (LH CH OUTPUT).
Input Level Considerations
The background music input can accept a wide range of input levels. You can connect
speaker lines, aux. outputs or line outputs.
WARNING: Be sure that the equipment you are connecting to
the Jukebox has an isolation transformer type power supply.
Equipment that does not have an isolation transformer can
damage the jukebox and/or create a shock hazard.
Mono Background Music Input
Connect a mono device as described here to provide background music from an external
source during periods that the jukebox is not playing a paid selection. The volume of this
music (generally lower than paid selections) is adjusted on the amplifier accessory board as
described on Page 9. The jukebox preamplifier settings are used for tone control. A device
connected to this input will not be heard during pages, or while the jukebox is playing a
selection.
Input Connections
Connect the input cable from the
music source as follows:
1.
Music source output to J7
(BGM MONO)
FIGURE 6 - MONO BACKGROUND MUSIC CONNECTIONS
6 MOD BOX AMPLIFIER ACCESSORY BOARD CONNECTIONS PM0564-03
J1
J2
J3
J4
J5
P1
AUX.
INTERCONNECT
SWITCH IN
TIME ADJUST
FOR BGM
P3
P4
J12
J13
J19
J20
J18
J17
J16
J11
J8
J10
J9
J15
J14
J7
J6
BGM
MUSIC
LEVEL
ADJUST
PREAMP/POWER AMP INTERCONNECT
P2
MONO MUSIC
SOURCE FOR
JUKEBOX
