Hardware Requirements:
This kit will allow Mega-Link® capabilities in all FORCE games and MAXX™ games equipped
with Unicorn motherboards. MAXX games with non-Unicorn motherboards require a differ-
ent kit (KUV-108-004-02) which includes the Ethernet card to prepare your game for linking.
If you have already installed the Ethernet card and couplers into your MAXX game, follow
the instructions in this manual to link your games.
NOTE: If your MAXX game has a Unicorn motherboard, the Ethernet cable is already
installed and connected to the motherboard and the DB connectors on the motherboard face
upward.
MAXX Software Requirements:
In order to install this kit, you must be running MAXX 2K software (V4.00) or greater.
To determine what version of software your game is running, push the set-up button inside
the cabinet. The program information will be displayed in the upper left corner of the first
screen that appears. Following the PG3002 will be the version number running on your
game.
MAXX/TouchTunes® Operation Requirements:
WARNING: Operation with TouchTunes Jukeboxes requires that all linked games are run-
ning Diamond 2 software (V7.02) or greater.
Operation with MegaTunes or Megatouch Combo Jukebox™ requires that all linked games
are running Ruby software (V11.00) or greater.
To determine what version of software your game is running, push the set-up button inside
the cabinet. The program information will be displayed in the upper left corner of the first
screen that appears. Following the PG3002 will be the version number running on your
game.
