BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP
A) Open
HARDWARE BAG FOR STEP 3.
B) Slide the
CONSOLE MAST BOOT
over the
CONSOLE MAST.
Carefully pull console wires through the console
mast
.
Attach the
CONSOLE WIRES
to the pre-attached routing wire. Discard wire when finished.
C) Attach the
CONSOLE MAST
to the
MAIN FRAME
using
BOLT (A), SPRING WASHER (D)
and
WASHER (B)
from
the front and 2
BOLTS (E),
2
WASHERS (B)
and 2
NUTS (F)
from the side.
D) Attach the
TOP CAP
to the
MAIN FRAME
by snapping tabs in place.
E) Slide
CONSOLE MAST BOOT
down
CONSOLE MAST
onto the
TOP CAP
.
BOLT (A)
20 mm
Qty: 1
NUT (F)
20 mm
Qty: 2
BOLT (E)
55 mm
Qty: 2
SPRING WASHER (D)
15 mm
Qty: 1
WASHER (B)
17 mm
Qty: 3
HARDWARE BAG FOR STEP CONTENTS :
MAIN FRAME
BOLT (A)
BOLTS (E)
WASHERS (B)
SPRING WASHER (D)
WASHER (B)
CONSOLE MAST
MAIN FRAME
CONSOLE MAST
CONSOLE MAST BOOT
TOP CAP
