COPYRIGHT © 2003 MERIT INDUSTRIES, INC.
Removing the Fan
1.
Turn off the game and disconnect it
from its power source.
2.
Unlock and open the right side door (if
you are facing the game) and the rear
door, then remove the coin box.
3.
Remove the screw securing the strain
relief cord to the rear door. Be careful
not to damage the door while the strain
relief cord is disconnected.
4.
Remove the modem bracket or coin
guard from the game if you have either
installed.
5.
Disconnect the motherboard power
connector from the motherboard (see
Figure 1 for connector location). If you
have a cable clamp securing the
motherboard power connector, remove
the screw from the cable clamp before
disconnecting the connector.
6.
Disconnect the line cord from the power
supply, unscrew the thumbnut secur-
ing the power supply to the game (see
Figure 2) and remove the power sup-
ply. Disconnect other harnesses and
connectors as needed, but be sure to
remember how they were connected.
Megatouch FORCE Radion Coin Box Retrofit
CONTENTS:
PM0358-03 MEGA TOUCH FORCE RADION COIN BOX RETROFIT
1
7.
Disconnect the harness running to the
fan located behind the power supply
(see Figure 2), then unscrew the
thumbnut fastening the fan to the game
and remove the fan. The fan will not
be replaced.
Installing the New Speaker
8.
Install the supplied speaker assembly
in the space where the fan assembly
was located and secure it with the
thumbnut.
9.
In the coin box area, disconnect the
speaker wire from the audio amp board.
See Figures 3 and 4.
10. Remove the (2) screws fastening the
existing speaker to the game and re-
move the speaker. The speaker will
not be replaced. See Figure 3 for loca-
tion.
11. Route the wire from the new speaker
so it does not interfere with the coin
path or the operation of the new coin
box, then connect it to the audio amp
board (see Figure 4).
QTY
PART NUMBER
DESCRIPTION
1
MW0566-XX
OVERSIZED RADION COINBOX
1
HW8401-02
FLAT HANDLE PULL
1
SA0404-01
3” SPEAKER/BRACKET
FOR KITS WITH COINBOX PARTS INCLUDED
1
EC9796-01
BILL ACCEPTOR
1
HW8733-05
KD LOCK, 7/8L
4
HW3150
6 - 32 KEPNUT
1
MW510-01
CAM, COINBOX LOCK
1
SA0314-01
STACKER HARNESS W/LOCKOUT
2
HW4393
8 - 32 x 1/2l PAN/PHL SEM SCREW
1
HW8811
TIE WRAP
