manualshive.com logo in svg

Meridian SW1600, User Manual

Share
Download
Meridian SW1600 User Manual Download Page 21

SETTING UP THE 

SUBWOOFER

16

The digital connections should be made with high-quality 75

Ω

 screened 

cable. Suitable cables are available from Meridian. We do not recommend 

using analogue audio cables, which do not have adequate shielding or the 

correct impedance, or cables intended for UHF applications, as these do not 

provide adequate shielding in the 1–30MHz region.

  Analogue connections

The following table gives details of the analogue audio connections:

Use this connection

To connect to this

PHONO INPUT MONO

The dedicated subwoofer output of a preamplifi er or digital 
surround controller, if it is the only subwoofer in the system, or 
the left or right output of a preamplifi er or digital surround 
processor, if the subwoofer is used as one of a stereo pair.

PHONO INPUT LEFT/
RIGHT

The left and right outputs of a preamplifi er or digital surround 
processor, if it is the only subwoofer.

XLR BALANCED INPUT 
MONO

The dedicated balanced subwoofer output of a preamplifi er or 
digital surround controller, if it is the only subwoofer in the 
system, or the left or right XLR output of a preamplifi er or 
digital surround processor with balanced outputs, if the 
subwoofer is one of a stereo pair.

XLR  BALANCED INPUT 
LEFT/RIGHT

The left and right XLR outputs of a preamplifi er or digital 
surround processor with balanced outputs, if it is the only 
subwoofer.

If you are connecting a single subwoofer to a preamplifi er or surround 

processor with a dedicated subwoofer output, connect this to the 

appropriate mono input on the subwoofer. Otherwise connect the left and 

right outputs to the subwoofer left/right inputs, and the subwoofer will 

mix the channels.

If you are connecting two subwoofers to a system, connect the left channel 

output to the mono input of the left subwoofer and the right channel 

output to the mono input of the right subwoofer.

The audio connections should be made with high quality audio phono 

leads or XLR leads.

  Communications connections

The following table gives details of the communications connections:

Use this connection

To connect to this

  MERIDIAN COMMS

The COMMS connection on a Meridian control unit or 
preamplifi er, using a COMMS lead

Summary of Contents for SW1600


































Reviews:

No comments

Brands by name

Popular brands

Load more brands