WAN
LAN
Digital O
ut
Comms
Trigger
Speaker
Link
L
R
Power In
!
3
2
1
Connects to
Control 10
PICTURED BELOw
Connect to a
LAN
port on your
network router
PICTURED ABOVE
Connection to
the Internet
1
3
2
2
Attach the Twinstore’s network port to a LAN port
on your router. You can use the Neutrik Ethercon
connector (supplied) with an Ethernet cable of
the appropriate length (not supplied.)
Attach the Control’s network port to a LAN port
on your router. You can use an additional Neutrik
Ethercon connector with your own Ethernet cable
here as well.
Make sure the wAN/Internet port of this router
connects to the rest of your network, or to your
Cable/DSL modem.
Depending on the make and model of your router,
crossover Ethernet cable(s) may be required
to make valid connections to your Ensemble and
Control components.
STEP
2
:
NETwork CoNNECTioNS
!
!
3
2
1
Connect the power supplies (provided) to the
rear of each Ensemble, and Control device.
Connect an
IEC
power cable to each supply.
Plug each power cable into a surge-protected
power strip.
Power-on each component by rocking its
rear-panel power switch.
All
external
power supplies are auto-sensing,
and use universal voltage power supplies.
Rackmount devices with internal power supplies
are not
auto sensing
and
must
be set to the
proper local voltage…
STEP
3
:
PowEr CoNNECTioNS
1
3
2
4
4
AC
115V
NORTH AMERICA
AC
230V
EUROPE, ASIA
Detachable
Power Suply
ONE FOR EACH
COMPONENT
Connects to
a power outlet
Digital O
ut
Comms
Trigger
Speaker
Link
L
R
Power In
1
Attaches to
a power supply
PICTURED ABOVE
4
Meridian Audio Ltd, Latham Road, Huntingdon, Cambridge PE29 6YE, United Kingdom
|
www.meridian-audio.com
Meridian Audio Ltd, Latham Road, Huntingdon, Cambridge PE29 6YE, United Kingdom
|
www.meridian-audio.com
