Digital O
ut
Comms
Trigger
Speaker
Link
Power In
L
R
tw
inst
ore
soo
loo
s
!
1
1
STEP
1
:
Audio CoNNECTioNS
Your Control 10 features a
S
/
PDIF
digital audio output. This can be
connected to an
S
/
PDIF
input on your
audio system, or on Meridian Digital
Active loudspeakers. The Control 10
also includes a SpeakerLink output,
which can be connected to Meridian
Digital Active loudspeakers.
A. S/PDIF digital audio output
B. Meridian SpeakerLink audio output
C. Meridian Comms (for integrating your
Control 10 with a Meridian system)
D. Meridian trigger and analogue inputs
(included for future use)
As a precaution, please lower the
volume and/or power down any
external audio components before
making new audio connections.
A
B
C
D
Quick Start Guide
For SYSTEMS USING CoNTroL 10 AS
A PrIMArY SoUrCE CoMPoNENT
(Control
10
+ Twinstore)
3
2
1
By default, a Sooloos Ensemble or Source
acts as the System Core. In this system,
you must set the Control 10 to act as the
System Core, by following the steps below.
Tap Settings Icon in the upper right
corner of the Cover Browser and tap
“System Settings”
On the Settings page, tap “Devices”
(located in the lower left-hand corner)
and then tap the “Confirm” button
On the Devices page, tap “Control 10”
On the Control 10 Device Configuration
page, check the box next to “System Core”
Tap “Apply Settings”
STEP
4
:
SySTEm SETiNGS
4
5
1
2
3
4
5
!
Meridian Audio Ltd, Latham Road, Huntingdon, Cambridge PE29 6YE, United Kingdom
|
www.meridian-audio.com
Meridian Audio Ltd, Latham Road, Huntingdon, Cambridge PE29 6YE, United Kingdom
|
www.meridian-audio.com
