Meridian Audio Limited, Stonehill, Stukeley Meadows, Huntingdon, Cambs PE29 6EX
Tel +44 1480 445678 Fax +44 1480 445686
http://www.meridian-audio.com/
Technical Information
JMB v 1.0 – 8th Dec 2003
What happened to EX/EZ?
EX and EZ were multichannel Presets that generated an additional mono surround back signal from a
two-surround signal. These have been replaced by Dolby PLIIx Mov6 and PLIIx Mus6, which generate
four surround signals from a two-surround signal.
Can I achieve an equivalent of the old “DTS Music” preset?
Not directly, but you can set up a ‘phantom source’. If you define a source to have audio input ‘last valid’
then switching to it will just apply the new default presets to whatever physical source is currently selected.
A phantom source like this, with the Movie6 Preset set to “Discrete” and the 2+2+2 menu set to “7.1”
would achieve the equivalent functionality.
Can I upsample movies?
Only audio streams that arrive at the processors input as PCM or MHR can be upsampled. The common
way to achieve this is to use a recent Meridian DVD player to decode the audio stream and output to the
processor via a multichannel digital connection.
Can I still force the DTS decoder for sources that play DTS poorly?
Yes, this feature still exists and is configured in the GUI. The decoder will not play any audio unless it is
DTS encoded.
Why aren’t my side speakers playing multichannel audio?
The “Discrete” preset is designed for use with DVD-A multichannel audio streams. There is a parameter in
the Preset called “2+2+2” which tells the processor what to do with the centre/LFE channel pair. This
menu defaults to “5.1”, which means the processor passes the six channels straight through to the
speakers (performing time alignment and bass management on the way). The menu should be set to “7.1”
if you want the side speakers to play audio derived from the surround channels.
Why can’t I add gain to the LFE channel?
THX require that the default gain applied to the LFE channel during their processing is 10dB, but that the
user should see this as +0dB. As such the displayed setting of +0dB is actually applying gain of +10dB.
Discrete is a Music Preset, not subject to THX approval, so the display in this case is allowed to show the
true maximum value, +10dB.
What is Automatic THX-EX switching?
For systems with four surrounds a new setting has been added to THX, THX Music and THX UltraII
Cinema - automatic THX Surround EX switching. If an EX encoded stream is detected in any of these
three modes the processor will automatically use THX Surround EX processing to generate the surround
signals. This will not change the ‘Preset’ chosen, but will change the DSP processing selected. The front
panel ‘Preset’ display will change to show:
“DVD THX Sur.EX 65”.
The user can defeat this automatic switching by setting the “Auto EX?” menu to “no”, in the GUI or from
the front panel. User Presets can be created (based on THX, THX Music or THX UltraII Cinema) with or
without automatic EX switching.
Note that the EX flag is not transmitted via Smart Link, so this feature is not accessible when decoding in
a Meridian DVD player. Play the Dolby Digital bitstream from the Aux output into a two-channel digital
input to utilize this feature.
