Using the MSR with Meridian 200 and 600 Series Products
12
Configuring the MSR
As supplied, the Meridian System Remote is configured for use
with Meridian 500 Series products.
If you have either Meridian 200 Series or 600 Series products in
your system you should reconfigure the MSR as described in
this chapter.
To configure the MSR
●
Open the case, as described in To disassemble the Meridian
System Remote, page 10.
●
Select the option required from the following table.
Use this option
For these products
Option 1
500 Series products and/or digital
loudspeakers in 500 Series mode.
Option 2
200 Series or 500 Series products in
200 Series mode.
Option 3
Digital loudspeakers in 200 Series
mode.
Option 4
601 Preamplifier.
●
Use the jumpers, shown in the diagram below, to select the
required option.
Option 2
Option 3
Option 4
Option 1
The key actions for each of the options are listed on the
following pages.
Summary of Contents for Meridian System Remote
Page 1: ...Meridian System Remote u s e r g u i d e...
Page 4: ...Preface iv...
Page 22: ...Using the MSR with Meridian 200 and 600 Series Products 18...
Page 24: ...Index 20...