6
M60C User Guide
Maintenance
There are no user serviceable parts inside the M60C.
One or two days after installation check the tightness of the fixing
screws of the loudspeaker drivers. These screws may loosen
slightly in shipping or with extremes of temperature or humidity,
and the speaker will not sound at its best with them loose. Do not
over tighten them. It is worth checking these screws after transit or
extended periods of loud playing.
The electronics do not need routine maintenance.
The audio sockets are gold plated and, where gold plated phono
sockets are used, there should be no need to clean the contacts.
Other phono plugs should be unplugged and replugged once a
year. Some proprietary contact cleaners may be used to
advantage, but you should seek the advice of your dealer.
Help!
No Sound.
•
Check the AC power supply to the M60C. The green light on
the front should be lit.
•
Check the AC supply to the other units in the system.
•
Check correct source is selected and that the source itself is
producing music.
•
Check interconnections are made to the correct sockets.
Unit goes silent when played hard.
M60C has a temperature sensing system on board which prevents
overheating of the electronics. The sound will continue when the
speaker has cooled.
Cleaning
The cabinet of the M60C is finished with veneer and may be wiped
clean with a damp cloth.
The display panel is glass, and should be cleaned using a barely
damp chamois leather.
Do not use abrasive cleaners on any part of the M60C.
