EN
M6
User Guide
EN
To use a pair of M6 loudspeakers in a
Meridian Digital Theatre
M6s are ideal as the front and rear loudspeakers in a Meridian
Digital Theatre, in conjunction with a Meridian Digital Surround
Controller such as the G68. The following diagram shows how
to connect the loudspeakers using “home run” wiring.
Connect the L+R SpeakerLink output on the lower row of
the G68 to the Master digital loudspeaker (here the front left
loudspeaker), using a Meridian SpeakerLink lead.
Connect the appropriate SpeakerLink outputs on the G68
to each of the remaining loudspeakers, using Meridian
SpeakerLink leads.
•
•
Make sure the Channel selector on each M6 is set to the
L/C position on the base of the left loudspeaker and to the R
position on the base of the right loudspeaker.
Alternatively you can connect the loudspeakers using “daisy
chain” wiring: connect the front and rear L loudspeakers to
the G68, and then link each pair of loudspeakers together by
connecting the output from the L loudspeaker to the input of
the R loudspeaker.
•
Meridian Surround Controller
Centre – Slave
Front L – Master
Front R – Slave
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
SpeakerLink lead
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
M6 – Rear L
M6 – Rear R
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
MERIDIAN
SPEAKERLINK
Summary of Contents for M6
Page 1: ...M6 DSP Loudspeaker User Guide ...
Page 7: ...M6 User Guide EN ...
Page 8: ...M6 User Guide EN ...
