4-1
October 2014 | Revision 1.0
Meridian Manufacturing, Inc.
4. SAFETY SIGNS
4.1 GENERAL INFORMATION
The types of safety signs and locations on the
equipment are shown in the following pages.
Good SAFETY AWARENESS requires that you
familiarize yourself with the various safety signs,
the type of warning and the area, or a particular
function related to that area.
1.
N ING
AR
If safety signs have been damaged,
removed, become illegible, or parts
replaced without signs, new signs must
be applied.
2. Replacement parts that displayed a safety
sign should also display the current sign.
3. Replacement safety signs (labels) are
available from your authorized Dealer Parts
Department or the factory at no cost.
4.2 HOW TO INSTALL SAFETY SIGNS
1. Be sure that the installation area is clean and
dry.
2. Be sure the temperature is above 50°F (10°C).
3. Determine the exact position before you
remove the backing paper.
4. Remove the smallest portion of the split
backing paper.
5.
Align the sign over the specified area and
carefully press the small portion with the
exposed sticky backing in place.
6.
Slowly peel back the remaining paper and
carefully smooth the remaining portion of the
sign in place.
7. Small air pockets can be pierced with a pin
and smoothed out using a piece of sign
backing paper.
4.3 SAFETY SIGN LOCATIONS
1.
Safety Decal on Anti-Siphon Valve.
2.
Product Serial Number Decal (#19984).
3.
WARNING — Read and Understand (#17553)
(located inside driver’s side compartment
door).
Chapter 4 | Safety Signs
