background image

 

 

 

1.0 Product 

Description 

 

Meridian’s DT&DR-2V2K/2K product series are fiber optic modems that transmit two channels 
of uni-directional digitized video and two bi-directional RS-485 (4-wire) data channels over one 
optical fiber using digital transmission technologies.  This product series uses Meridian’s 
standard 2-slot wide chassis mount card assembly and plugs into the following Meridian chassis:  
SR-1000/S, SR-1200/S, SR-1500/S, and SR-2001 & SR-2000 series 19” equipment chassis. 
 
The digital modules consist of various plug-in personality function cards or SIMs.  The top card 
is the optical card that contains the fiber optic interface.  The optical output (Tx) connector is 
located on the left side of the module while the optical input (Rx) connector is adjacent to it on 
the right side of the module.  The second SIM contains the two video Input/Output coaxial 
interfaces.  The bottom SIM card contains the two bi-directional RS-485 data channels. 

 

2.0 Installation 

 

Series DT&DR-2V2K/2K products are two-slot wide cards and, as such, occupy two slots in 
Meridian’s standard chassis (SR-1000/S, SR-1200/S, SR-1500/S, and SR-2001 & SR-2000 series 
19” equipment chassis).  To install in the chassis, orient the card with the Meridian logo at the top 
of the module and slide onto the top and bottom card guides in the chassis.  Press securely on the 
top and bottom of the module to ensure that it is fully seated in the chassis so that the electrical 
connector mates with the chassis-mounted motherboard.  Once installed, manually tighten the two 
thumbscrews located at the top and bottom of the card.  Do not use tools to secure these and do 
not over tighten. 
 

Note

:  A fully loaded subrack should have forced-air cooling to avoid excessive heat generation 

inside the chassis.  A fan assembly tray (P/N FA-2000) with three (3) fans is available and should 
be installed under the 19" SR-2000/1 whenever possible. 

 

3.0  Product Signal Format & Specifications 

 

 

 

The DT&DR-2V2K/2K series products transmit and receive the following signals: 

 

Signal Type 

Channels 

Transmit 

Receive 

NTSC/PAL video 

DT-2V2K/2K DR-2V2K/2K 

RS-485 (4-wire) 

Yes 

Yes 

 

700 Elmont Rd, Elmont, NY 11003, Tel: 516-285-1000; Fax: 516-285-6300 

www.Meridian-tech.com

 

Page 3 

Reviews: