Meridian 112BST, Operator'S Manual

Page: 27 / 64

27
4. Slowly back the tow vehicle until the hitch and
ball are aligned.
5. Lower the hitch onto the ball.
6. Raise the jack and place it in its stowed
position.
7. Close the receiver by pulling the spring
loaded locking collar back to release the hitch
mechanism. Install the retainer clip to prevent
unwanted opening of the receiver.
8. Attach the safety chain securely to the tow
vehicle to prevent unexpected separation.
Cross the chains when attaching.
9. Connect the wiring harness for the lights and
brakes.
10. Connect the break-away system cable to the
tow vehicle. Make sure the key on the end of
the cable is properly plugged into the receiving
unit.
11. Route all the cables in a manner that will
prevent snagging. Be sure to provide slack for
turning.