background image

3

The ONE-SIXTY and ONE-FORTY models 
are equipped mainly with shocks from the 
RockShox Super Deluxe series. Therefore 
we recommend the following air pressure 
figures as a first starting point.

If you want to use the ONE-SIXTY with a 
coil shock, we recommend the following 
spring rates.

Most ONE-SIXTY/FORTY models are 
equipped with shocks from the RockShox 
Super Deluxe series. The rebound damping 
is directly related to the air spring pressure 
and needs to be adjusted after setting the 
air pressure. Therefore we recommend the 
following settings as a starting point.

Rider weight
(including all
essentials)

Rider weight
(including all
essentials)

Rebound
(clicks from 
fully closed)

Air pressure rear shock 
RockShox Super Deluxe

ONE-SIXTY
Coil spring rate

Air pressure

ONE-SIXTY ONE-FORTY

120 psi

140 psi

160 psi

180 psi

200 psi

225 psi

250 psi

300 Ibs

350 Ibs

400 Ibs

450 Ibs

500 Ibs

120 psi

140 psi

160 psi

180 psi

200 psi

220 psi

240 psi

260 psi

280 psi

50 kg

60 kg

70 kg

80 kg

90 kg

100 kg

110 kg

55 - 65 kg

65 -75 kg

75 - 85 kg

85 - 95 kg

95 -105 kg

12 (fully open)

11

9

8

6

5

3

1

0

145 psi

165 psi

185 psi

205 psi

225 psi

250 psi

275 psi

RECOMMENDED AIR 
PRESSURES FOR ROCKSHOX 
SUPER DELUXE SHOCKS

RECOMMENDED COIL
SPRING RATES FOR
COIL SHOCKS

REBOUND DAMPING

Summary of Contents for ONE 40




















Reviews: