43
Chapter 4 Configure the Router in Wireless Router Mode
1. Visit
http://mwlogin.net
, and log in with your Mercusys ID or the password you set for the
router.
2. Go to
Advanced
>
Security
>
Firewall
, and configure the parameters as you need. It’s
recommended to keep the default settings.
4. 9. 2. Access Control
Access Control is used to block or allow specific client devices to access your network (via
wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed devices
(Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1. Visit
http://mwlogin.net
, and log in with your Mercusys ID or the password you set for the
router.
2. Go to
Advanced
>
Security
>
Access Control
.
3. Select the access mode to either block (recommended) or allow the device(s) in the list.
To block specific device(s):
1 ) Select
Blacklist
and click
SAVE
.
