54
Chapter 4 Configure the Router in Wireless Router Mode
1. Tick the
Enable
checkbox of
Remote Management
.
2. Keep the HTTP port as default setting (recommended) or enter a value between 1024 and
65535.
3. Select
Specified Device
for
Remote Managers
.
4. In the Only this IP Address field, enter the IP address of the remote device to manage the
router.
5. Click
SAVE
.
Devices using this WAN IP can manage the router by logging in to
http://Router’s WAN
IP:port number
(such as
http://113.116.60.229:1024
).
Tips:
The router’s WAN IP is usually a dynamic IP. Please refer to
if you want to log in to the router through a
domain name.
4. 10. 6. System Log
1. Visit
http://mwlogin.net
, and log in with the password you set for the router.
2. Go to
Advanced
>
System
>
System Log
, and you can view the logs of the router.
3. Click
SAVE TO LOCAL
to save the system logs to a local disk.
4. 10. 7. Diagnostics
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
