32
Chapter 5 Advanced Configuration
• Mode
- Select the appropriate mode according to your ISP.
•
LAN 1/2
- Assign your LAN port to whether function as the internet supplier or as
the IPTV supplier.
5. 1. 6. DHCP Server
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and
the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
devices from the IP Address Pool. You can change the settings of DHCP Server if
necessary, and you can reserve LAN IP addresses for specified client devices.
• To specify the IP address that the router assigns:
1. Visit
http://mwlogin.net
, and log in with the password you set for the router.
2.
Go to
Advanced
>
Network
>
DHCP Server
and locate the DHCP Server section.
1.
Tick the
Enable
checkbox.
2. Enter the starting and ending IP addresses in the
IP Address Pool
.
3. Enter other parameters if the ISP offers. The
Default Gateway
is automatically
filled in and is the same as the LAN IP address of the router.
4.
Click
SAVE
.
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as Obtain an IP Address
automatically.
•
To reserve an IP address for a specified client device:
1. Visit
http://mwlogin.net
, and log in with the password you set for the router.
2.
Go to
Advanced
>
Network
>
DHCP Server
and locate the
Address Reservation
section.
