350.026UK User Manual
Cloud Storage:
1.
With the device in sleep state
when either the PIR is
triggered or the doorbell is
pressed, the device will
automatically upload 8
seconds of video to the
storage cloud. Each device
can record 20 events per day
and provide a week of loop
recording space and Traffic
for users.
2.
To first enable and then view
the cloud storage, in the settings menu choose SD Card then turn on the Cloud video
toggle switch (circled above). Once enabled the Switch icon at the bottom of the video
screen becomes the "Cloud Storage" button and can be pressed to view all recordings.
These will be in a list view unless you press the calendar icon at the top to change to
calendar view (circled above).
Useful Reminders:
•
The device is powered by 2 x 18650 rechargeable lithium batteries. When fully charged,
they will provide the unit with up to 6 months of usage (av. 10 calls each day of 30 secs
duration). When the batteries are running low on power (5% or below) a warning
message will appear on all connected smart devices. At this point, recharge the batteries
as soon as possible to avoid the unit powering down and providing no protection.
•
Try to keep the door
bell in good reach of your wireless router’s coverage and
try to avoid
any blockages by thick walls, ceilings and doors. Permanent mounting of the device
should only be undertaken once a video stream has been viewed and confirmed of
acceptable quality.
•
This device is a low power, intelligent product that supports remote wakeup from
connected devices, PIR human detection and activation by doorbell press. After any of
these functions, the unit will only remain in a live state for a maximum of 30 seconds,
before returning to its resting standby state.
•
Never connect the doorbell to an AC 220V mains power supply otherwise, it will damage
the devices circuitry.
•
There is also an additional plug-in chime available (350.030UK), which can be connected
into the same network as the doorbell and smart devices. The chime will be triggered
when the doorbell press is activated and can be useful if there are no connected smart
devices within the environment at any time.
