manualshive.com logo in svg

Mercury V-6 series, User Manual

Share
Download
Mercury V-6 series User Manual Download Page 110

 108

V. Claim shall be made under this warranty by delivering the

Product for inspection to a MerCruiser dealer authorized
to service the Purchaser’s product. If purchaser cannot
deliver Product to such authorized dealer, he may give
notice in writing to the Company. We shall then arrange for
the inspection and repair, provided such service is covered
under this warranty. Purchaser shall pay for all related
transportation charges and/or travel time. If the service is
not covered by this warranty purchaser shall pay for all
related labor and material and any other expenses
associated with that service. Any Product or parts shipped
by purchaser for inspection or repair must be shipped with
transportation charges prepaid. The Warranty
Registration Card is the only valid registration
identification and must be presented at the time warranty
service is required. Warranty claims will not be accepted
without presentation of the Warranty Registration Card.

VI. Our obligation under this Warranty shall be limited to

repairing a defective part, or at our option, refunding the
purchase price or replacing such part or parts with new or
Mercury certified remanufactured parts as shall be
necessary to remedy any malfunction resulting from
defects in material or workmanship as covered by this
Warranty. We reserve the right to improve the design of
any Product without assuming any obligation to modify
any Product previously manufactured.

VII. ALL INCIDENTAL AND/OR CONSEQUENTIAL

DAMAGES ARE EXCLUDED FROM THIS WARRANTY.
WARRANTIES OF MERCHANTABILITY AND FITNESS
ARE EXCLUDED FROM THIS WARRANTY. IMPLIED
WARRANTIES ARE LIMITED TO THE LIFE OF THIS
WARRANTY. SOME STATES OR COUNTRIES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS OR THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSIONS MAY NOT APPLY TO YOU.

VIII. This warranty gives you specific legal rights, and you may

also have other legal rights which vary from state to state.

Summary of Contents for V-6 series
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands