Mercury TowSport Inboards, Manual

Page: 89 / 108

SPECIFICATIONS AND MAINTENANCE
90-864197020 MARCH 2002 Page 83
0101
Power Package Recommissioning
1. Ensure that all cooling system hoses are connected properly and hose clamps are tight.
CAUTION
When installing the battery, be sure to connect the NEGATIVE (–) battery cable to
the NEGATIVE (–) battery terminal and the POSITIVE (+) battery cable to the
POSITIVE (+) battery terminal. If the battery cables are reversed, electrical system
damage will result.
2. Install a fully-charged battery. Clean the battery cable clamps and terminals and
reconnect cables (see CAUTION listed above). Tighten each cable clamp securely
when connecting.
3. Coat the terminal connections with a battery terminal anti-corrosion agent.
4. Perform all the checks in the BEFORE STARTING column of the Operations Chart.
CAUTION
Overheating from insufficient cooling water will cause engine and drive system
damage. Ensure that there is sufficient water always available at water inlet holes
during operation.
5. Start the engine and closely observe instrumentation to ensure that all systems are
functioning correctly.
6. Carefully inspect the engine for fuel, oil, fluid, water and exhaust leaks.
7. Inspect the steering system, shift and throttle control for proper operation.