12
Motherboard User’s Guide
Note1:
Please be noted you can
NOT
use DIMM1-2(DDR2 533/DDR400) and
DIMM3-4(DDR400) simultaneously. Only use either DDR2(533/400) or
DDR(400) memory modules!
Note2:
Do not remove any memory module from its antistatic packaging until
you are ready to install it on the motherboard. Handle the modules only
by their edges. Do not touch the components or metal parts. Always
wear a grounding strap when you handle the modules.
Memory Module Installation Procedure
These modules can be installed with up to 2 GB system memory. Refer to the
following to install the memory module.
1.
Push down the latches on both sides of the DIMM socket.
2.
Align the memory module with the socket. There is a notch on the
DIMM socket that you can install the DIMM module in the correct
direction. Match the cutout on the DIMM module with the notch on
the DIMM socket.
3.
Install the DIMM module into the socket and press it firmly down
until it is seated correctly. The socket latches are levered upwards and
latch on to the edges of the DIMM.
4.
Install any remaining DIMM modules.
DIMM1--2
(DDR2)
DIMM3--4
(DDR)
