Mercury Series USB2.0 Cameras User Manual
28
Figure 4- 2 Camera input circuit
4.8.2.
Output Port
The MER series camera has one channel output signal, which is connected into the camera by the Hirose
of the camera. And the output signal is opto-isolated. The voltage range of the VCC must between
5VDC -
24VDC
. The Maximum electric current of output signal is 50mA.
At the output end of the camera, when the triode is turned on, the output signal is logical 1, and when the
triode is turned off, the output signal is logical 0.
See as the following schematic (
Figure 4- 3
):
Figure 4- 3 Camera output circuit
