28
Using BIOS
Advanced BIOS Features
This option defines advanced information about your system.
X
X
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
&'()
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
ATA 66/100 IDE Cable Msg.
[Enabled]
Quick Power On Self Test
[Enabled]
First Boot Device
[Floppy]
Second Boot Device
[HDD-0]
Third Boot Device
[CDROM]
Boot Other Device
[Enabled]
Swap Floppy Drive
[Disabled]
Boot Up NumLock Status
[On]
Gate A20 Option
[Fast]
Typematic Rate Setting
[Disabled]
Typematic Rate (Chars/Sec )
6
Typematic Delay (Msec)
250
Security Option
[Setup]
APIC Mode
[Enabled]
OS Select For DRAM > 64MB
[Non-OS2]
HDD S.M.A.R.T. Capability
[Disabled]
Video BIOS Shadow
[Enabled]
Small Logo (EPA) Show
[Disabled]
Phoenix-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Item Help
Menu Level
%
ATA 66/100 IDE Cable Msg. (Enabled)
This item enables or disables the display of the ATA 66/100 Cable MSG.
Quick Power On Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start up
faster. You might like to enable this item after you are confident that your system hardware
is operating smoothly.
First/Second/Third Boot Device (Floppy/HDD-0/CDROM)
Use these three items to select the priority and order of the devices that your system
searches for an operating system at start-up time.
Boot Other Device (Enabled)
When enabled, the system searches all other possible locations for an operating system if it
fails to find one in the devices specified under the First, Second, and Third boot devices.
Swap Floppy Drive (Disabled)
If you have two floppy diskette drives in your system, this item allows you to swap the
assigned drive letters so that drive A becomes drive B, and drive B becomes drive A.
Gate A20 Option (Fast)
This item defines how the system handles legacy software that was written for an earlier
generation of processors. Leave this item at the default value.
Boot Up NumLock Status (On)
This item defines if the keyboard Num Lock key is active when your system is started.
