Check the Jumper Settings
Check all the mainboard jumpers to ensure that the board is configured
correctly.
JP1 Clear CMOS Memory Jumper
This jumper lets you erase the system setup settings that are stored in
CMOS memory. You might need to erase this data if incorrect settings
are preventing your system from operating. To clear the CMOS memory,
turn off the system, disconnect the power cable from the mainboard, and
short the appropriate pins for a few seconds.
Function Jumper
Cap
Clear CMOS
Short pins 1-2
Normal Operation
Short pins 2-3
JP2: Keyboard Power On Jumper
This jumper lets you use a typed-in password as a power switch to turn
your system on. If you enable this property, you need to define the
password or the hot keys using the setup utility. See Chapter 3.
Function Jumper
Cap
Enable keyboard power on
Short pins 1-2
Disable keyboard power on Short pins 2-3
JP1
1 2 3
JP2
JP7
JP1
JP2
JP9
1 2 3
15
