Mercury Green 320, Service Manual

Page: 60 / 85

60
7.
Insert the edge connector into the slot. The gold edge connector of the card should not be visible when the card
is fully inserted.
8.
Press the card downward where you should hear an audible click as the latches of the connector secure the card
in place.
9.
Once the module is properly seated, you can replace the cover on this compartment.
10.
Replace and tighten the screw.
Easy to Upgrade HDD Module
The hard drive in your notebook computer is made to be easily swapped out for upgrading. You should back up your hard drive
before attempting o change the hard drive.
Make sure that before you install a new drive, all the files in your system should be backed up.
How to upgrade your Hard Drive
1.
Power down the system completely. Turn the system over with the front of the unit facing you.
2.
Remove the two screws that secure the compartment cover and set them in a safe place.
3.
Slide the HDD cover away from the compartment.
4.
The drive is attached to a special bracket that secures it to the notebook computer. There are 2 screws that
hold the bracket.
5.
Push the HDD slightly as shown in the illustration to release it from the pins of the drive.
6.
Gently hold the grip of the HDD, lift it up to release from its compartment.