manualshive.com logo in svg

Mercury 8/9.9 BigFoot, Manual, Page: 151 / 153

Share
Download
Mercury 8/9.9 BigFoot Manual Download Page 151

ENGINE INSTALLATION

eng

139

  

Battery Installation ‑ Electric Start Models

MOUNTING BATTERY

Follow the battery manufacturer's instructions carefully. Mount

battery in the boat so it is secured against movement, preferably

in a battery box. Make sure battery is equipped with a

nonconductive shield to prevent accidental shorting of battery

terminals.

NOTE: Electric starting outboards must have the battery cables

connected to a battery whenever the engine is running, even if

started manually, as damage to the charging system could

result.

Battery Connections

CONNECTING OUTBOARD BATTERY CABLES

First, connect the red battery cable to the (+) positive battery

terminal and then connect the black battery cable to the (–)

negative battery terminal.

DISCONNECTING OUTBOARD BATTERY CABLES

First, disconnect the black battery cable from the (–) negative

terminal and then disconnect the red battery cable from the (+)

positive terminal.

27158

Summary of Contents for 8/9.9 BigFoot


























































































































































Reviews:

No comments