3. Lubricate the propeller shaft with Extreme Grease or 2‑4‑C with PTFE.
(Refer to
Propeller Replacement
for removal and installation of the
propeller.) Coat the entire propeller shaft with lubricant to prevent the
propeller hub from corroding to the shaft.
68645
Tube Ref
No.
Description
Where Used
Part No.
Extreme Grease
Propeller shaft
8M0071842
95
2-4-C with PTFE
Propeller shaft
92-802859A 1
Changing Engine Oil
NOTICE
Discharge of oil, coolant, or other engine/drive fluids into the environment is
restricted by law. Use caution not to spill oil, coolant, or other fluids into the
environment when using or servicing your boat. Be aware of the local
restrictions governing the disposal or recycling of waste, and contain and
dispose of fluids as required.
ENGINE OIL CAPACITY
The engine oil capacity is approximately 450 ml (15 fl oz).
OIL CHANGING PROCEDURE
1. Place the outboard in an upright (not tilted) position.
2. Turn the outboard to gain access to the drain plug. Remove the drain plug
and drain the engine oil into an appropriate container. Lubricate the seal
on the drain plug with oil and install.
MAINTENANCE
eng
41
