Mercury 40 TwoStroke Operation, Maintenance & Installation Manual Download Page 9

Page: 9 / 96

Maintenance

Cleaning Care Recommendations.................................................................... 47

Inspection and Maintenance Schedule............................................................. 49

Flushing the Cooling System............................................................................ 50

Flushing the Cooling System ‑ Models with Accessory Hose Flush Attachment

.......................................................................................................................... 51

Top Cowl Removal and Installation.................................................................. 52

Battery Inspection ............................................................................................ 53

Fuel System...................................................................................................... 53

Steering Link Rod Fasteners............................................................................ 55

Fuse Replacement............................................................................................56

Corrosion Control Anode.................................................................................. 56

Propeller Replacement..................................................................................... 57

Spark Plug Inspection and Replacement..........................................................60

Lubrication Points............................................................................................. 61

Checking Power Trim Fluid...............................................................................63

Gearcase Lubrication........................................................................................63

Submerged Outboard....................................................................................... 65

Storage

Storage Preparation..........................................................................................66

Protecting External Outboard Components...................................................... 66

Protecting Internal Engine Components........................................................... 67

Gearcase.......................................................................................................... 67

Draining Hose Flush Attachment (If Equipped)................................................ 67

Positioning Outboard for Storage..................................................................... 67

Battery Storage................................................................................................. 67

Troubleshooting

Starter Motor Will Not Crank the Engine...........................................................69

Engine Will Not Start.........................................................................................69

Engine Runs Erratically.................................................................................... 69

Performance Loss.............................................................................................70

Battery Will Not Hold Charge............................................................................ 70

Owner Service Assistance

Service Assistance........................................................................................... 71

Ordering Literature............................................................................................73

eng

vii

Summary of Contents for 40 TwoStroke

































































































Search results

Summary of Contents for 40 TwoStroke

Reviews:

Related manuals for 40 TwoStroke

Brands by name

Popular brands

Mercury 40 TwoStroke, Operation, Maintenance & Installation Manual

Search results

Summary of Contents for 40 TwoStroke

Reviews:

Related manuals for 40 TwoStroke

Brands by name

Popular brands