IMPORTANT: When replacing the thrust guide wear pads, replace both pads
and install new retaining hardware.
66265
Checking Power Trim Fluid (Single‑Ram Trim)
1. Trim the outboard in the full down/in position.
2. Check the fluid level in the trim pump reservoir. The level should be
between the minimum ("MIN") and the maximum ("MAX") level on the
reservoir.
3. If necessary, remove the yellow fill cap and add Power Trim and Steering
Fluid until the level in the reservoir reaches the minimum level. It is
acceptable to fill the reservoir beyond the minimum level, but do not
overfill past the maximum level.
114
15033
MAINTENANCE
eng
69
Summary of Contents for 300R HD CMS Mechanical
Page 1: ...Operation and Maintenance Manual 2018 Mercury Marine 300R HD CMS Mechanical 8M0140585 518 eng...
Page 2: ...eng...
Page 6: ...eng iv...
Page 10: ...eng viii...