Top Cowl Removal and Installation
REMOVAL
Release the front and side cowl latches. Lift the top cowl from the outboard.
2732
INSTALLATION
Position the top cowl over the engine. Make sure the bottom rubber seal fits
properly and lock the front and side latches.
Fuel System
FUEL SYSTEM SERVICE INFORMATION
!
WARNING
Fuel is flammable and explosive. Ensure that the key switch is off and the
lanyard is positioned so that the engine cannot start. Do not smoke or allow
sources of spark or open flame in the area while servicing. Keep the work
area well ventilated and avoid prolonged exposure to vapors. Always check
for leaks before attempting to start the engine, and wipe up any spilled fuel
immediately.
IMPORTANT: Use an approved container to collect and store fuel. Wipe up any
spillage immediately. Material used to contain spillage must be disposed of in
an approved receptacle.
Before servicing any part of the fuel system:
•
Stop engine and disconnect the battery.
•
Drain the fuel system completely.
•
Perform fuel system service in a well‑ventilated area.
•
Inspect any completed service work for sign of fuel leakage.
FUEL LINE INSPECTION
Visually inspect the fuel line and primer bulb for cracks, swelling, leaks,
hardness, or other signs of deterioration or damage. If any of these conditions
are found, the fuel line or primer bulb must be replaced.
MAINTENANCE
52
eng
Summary of Contents for 250 XS OptiMax
Page 2: ...eng...
Page 6: ...eng iv...