i
If the outboard motor’s serial number plate contains the CE mark in the lower
left‑hand corner, the following statement applies:
This outboard motor manufactured by Mercury Marine, Fond du Lac, WI, USA
or Marine Power Europe Inc. Park Industrel, de Petit‑Rechain, Belgium
complies with the requirements of the following directives and standards, as
amended:
Recreational Craft Directive:
94/25/EC; std. ISO 8665, ISO
11547
Machinery Directive:
98/37/EC,
EMC Directive:
89/336/EC; std. EN50081‑1,
SAE J551 (CISPR Pub. 12), EN
50082‑1, IEC 61000 PT4‑2, IEC
61000 PT4‑3
Patrick C. Mackey
President, Mercury Marine, Fond du Lac, WI USA
European Regulations Contact:
Product Environmental Engineering Department, Mercury Marine,
Fond du Lac, WI USA
EPA Emissions Regulations
Outboards manufactured by Mercury Marine in the United States are
certified to the United States Environmental Protection Agency as
conforming to the requirements of the regulations for the control of air
pollution from new outboard motors. This certification is contingent on
certain adjustments being set to factory standards. For this reason, the
factory procedure for servicing the product must be strictly followed and,
wherever practicable, returned to the original intent of the design.
Maintenance, replacement, or repair of the emission control devices
and systems may be performed by any marine engine repair
establishment or individual.
Engines are labeled with an Emission Control Information decal as
permanent evidence of EPA certification.
!
WARNING
The engine exhaust from this product contains chemicals known to
the state of California to cause cancer, birth defects or other
reproductive harm.
© 2005 Mercury Marine
225 Pro XS and 225 Sport XS OptiMax
90-841915061 505
Summary of Contents for 225 Sport XS OptiMax
Page 4: ...iv ...
