Mercury 225 Sport XS OptiMax User Manual Download Page 2

Page: 2 / 96

Thank You

for your purchase of one of the finest outboards available. You have made

a sound investment in boating pleasure. Your outboard has been

manufactured by Mercury Marine, a world leader in marine technology and

outboard manufacturing since 1939. These years of experience have been

committed to the goal of producing the finest quality products. This led to

Mercury Marine's reputation for strict quality control, excellence, durability,

lasting performance and being the best at providing after the sale support.
Please read this manual carefully before operating your outboard. This

manual has been prepared to assist you in the operation, safe use and care

of your outboard.
All of us at Mercury Marine took pride in building your outboard and wish

you many years of happy and safe boating.
Again, thank you for your confidence in Mercury Marine.

Warranty Message

The product you have purchased comes with a limited warranty from

Mercury Marine, the terms of the warranty are set forth in the Warranty

Information Section of this manual. The warranty statement contains a

description of what is covered, what is not covered, the duration of

coverage, how to best obtain warranty coverage, important disclaimers and

limitations of damages, and other related information. Please review this

important information.
The description and specifications contained herein were in effect at the

time this manual was approved for printing. Mercury Marine, whose policy

is one of continued improvement, reserves the right to discontinue models

at any time, to change specifications, designs, methods, or procedures

without notice and without incurring obligation.
Mercury Marine, Fond du Lac, Wisconsin U.S.A.
Litho in U.S.A.
© 2005, Mercury Marine
Mercury, Mercury Marine, MerCruiser, Mercury MerCruiser, Mercury

Racing, Mercury Precision Parts, Mercury Propellers, Mariner, Quicksilver,

#1 On The Water, Alpha, Bravo, Pro Max, OptiMax, Sport‑Jet, K‑Planes,

MerCathode, RideGuide, SmartCraft, Zero Effort, M with Waves logo,

Mercury with Waves logo, and SmartCraft logo are all registered

trademarks of Brunswick Corporation. Mercury Product Protection logo is

a registered service mark of Brunswick Corporation.

Summary of Contents for 225 Sport XS OptiMax

































































































Search results

Summary of Contents for 225 Sport XS OptiMax

Reviews:

Related manuals for 225 Sport XS OptiMax

Brands by name

Popular brands

Mercury 225 Sport XS OptiMax, User Manual

Search results

Summary of Contents for 225 Sport XS OptiMax

Reviews:

Related manuals for 225 Sport XS OptiMax

Brands by name

Popular brands