Message center procedure
For information on activating/deactivating the autolock feature using the
vehicle’s message center, refer to
Message center
information in the
Driver Controls
chapter.
Autounlock
The autounlock feature will unlock all the doors when:
•
the ignition is in the on position, all the doors are closed, and the
vehicle has been in motion at a speed greater than 12 mph (20 km/h);
•
the vehicle has then come to a stop and the ignition is turned to the
off or accessory position; and
•
the driver door is opened within 10 minutes of the ignition being
transitioned to the off or accessory position.
Note:
The doors will not autounlock if the vehicle has been
electronically locked before the driver door is opened.
Deactivating/activating autounlock
Your vehicle comes with the autounlock feature activated. There are four
methods to enable/disable this feature:
•
Through your authorized dealer, or
•
by using the power door unlock/lock sequence,
•
Performing the keyless entry keypad procedure (if equipped), or
•
by using the instrument cluster message center. Refer to
Message
center
in the
Driver Controls
chapter.
Note
: The autounlock feature can be activated/deactivated
independently of the autolock feature.
Power door lock switch autounlock enable/disable procedure
Before starting, ensure the ignition is in the off position and all vehicle
doors are closed. You must complete Steps 1–5 within 30 seconds or the
procedure will have to be repeated. If the procedure needs to be
repeated, wait a minimum of 30 seconds before beginning again.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Locks and Security
88
