Mercury 135 Verado, Manual, Page: 88 / 146

FEATURES AND CONTROLS
80
NOTE: There is a 10 second time frame to complete a helm
transfer. If the helm transfer is not completed, the action will be
cancelled and a double beep will sound. Pressing the
"TRANSFER" button again will re‑initiate a helm transfer.
SYNC
1 LEVER
NEUTRAL
TROLL
THROTTLE
ONLY DOCK
TRANSFER
+
-
22593
Synchronizing Helms Prior To Transfer
Pressing the "TRANSFER" button allows the boat operator 10
seconds to match up the control handle settings at the new helm
with the handle settings that are at the old (to be inactive) helm. If
the handles are not matched, the neutral lights will flash. The light
blinks faster as the handles are nearing match position. Once the
light stays on continuously, the handles are matched and the
button can be pressed again to complete the transfer. This
completes the transfer process, and gives control to the new
station. If the helm transfer is not completed within 10 seconds, the
action will be cancelled.
Warning System
WARNING HORN SIGNALS
When the key switch is turned to the "ON" position, the horn
(located on the command module harness) will turn on for a
moment as a test to indicate the horn is working.
There are two types of warning horns to alert the operator of an
active problem within the engine’s operating system.
1.
Continuous six second beep:
Indicates a critical engine
condition. Depending on the condition, the Engine Guardian
System may engage and protect the engine by limiting it’s
power. You should return to port immediately and contact your
servicing dealer.