Mercury 1000 Induction, Manual

Page: 17 / 48

13
1
2
3
The shelf has a small kink on either side (
Fig. 2.28
). To remove
the shelf, line these up with the stops in the shelf support
(
Fig. 2.29
). Lift the rear of the shelf upward so that it will pass
over the shelf stop and then pull it forward (
Fig. 2.30
).
Fit in the reverse order, making sure to push it fully back.
To Remove and Refit the Ladder Shelf Supports
Lift the ladder support hooks out of the two locating holes in
the oven side (or divider) before lifting the support clear of
the bottom ladder restraint.
Refit by inserting the bottom of the ladder into the restraint
before fitting the hooks through the locating holes.
Oven Shelves – Right-hand (Tall) Oven
When using the tall oven, you can cook on all four shelves at
the same time, but make sure that they are well spaced out
allow the hot air to circulate.
Fig. 2.25
Fig. 2.26 Fig. 2.27
Fig. 2.28
Fig. 2.29 Fig. 2.30