Mercury 10 Marathon Page 16 User Manual Download

Page: 16 / 94

WARRANTY INFORMATION

CONDITIONS THAT MUST BE MET IN ORDER TO OBTAIN WARRANTY

COVERAGE: Warranty coverage is available only to retail customers that

purchase from a Dealer authorized by Mercury Marine to distribute the

product in the country in which the sale occurred, and then only after the

Mercury Marine specified pre-delivery inspection process is completed and

documented. Warranty coverage becomes available upon proper

registration of the product by the authorized dealer. Corrosion prevention

devices specified in the Operation and Maintenance Manual must be in use

on the boat, and routine maintenance outlined in the Operation and

Maintenance Manual must be timely performed (including without limitation

the replacement of sacrificial anodes, use of specified lubricants, and

touch-up of nicks and scratches) in order to maintain warranty coverage.

Mercury Marine reserves the right to make warranty coverage contingent

upon proof of proper maintenance.
WHAT MERCURY WILL DO: Mercury's sole and exclusive obligation

under this warranty is limited to, at our option, repairing a corroded part,

replacing such part or parts with new or Mercury Marine certified

re-manufactured parts, or refunding the purchase price of the Mercury

product. Mercury reserves the right to improve or modify products from time

to time without assuming an obligation to modify products previously

manufactured.
HOW TO OBTAIN WARRANTY COVERAGE: The customer must provide

Mercury with a reasonable opportunity to repair, and reasonable access to

the product for warranty service. Warranty claims shall be made by

delivering the product for inspection to a Mercury dealer authorized to

service the product. If purchaser cannot deliver the product to such a

dealer, written notice must be given to Mercury. We will then arrange for

the inspection and any covered repair. Purchaser in that case shall pay for

all related transportation charges and/or travel time. If the service provided

is not covered by this warranty, purchaser shall pay for all related labor and

material, and any other expenses associated with that service. Purchaser

shall not, unless requested by Mercury, ship the product or parts of the

product directly to Mercury. Proof of registered ownership must be

presented to the dealer at the time warranty service is requested in order

to obtain coverage.

Summary of Contents for 10 Marathon































































































Search results

Summary of Contents for 10 Marathon

Reviews:

Related manuals for 10 Marathon

Brands by name

Popular brands

Mercury 10 Marathon, User Manual

Search results

Summary of Contents for 10 Marathon

Reviews:

Related manuals for 10 Marathon

Brands by name

Popular brands