6 - M
AINTENANCE
46
90-8M0114811 JANUARY 2016
7. Assemble the filter assembly, making sure that the screen is
installed with the up side in the proper orientation.
NOTE: Engine to reservoir oil line lengths affect total oil capacity and
will vary with each installation.
8. Install the bottom oil reservoir plug and tighten securely.
a -
Oil drain plug
9. Begin by filling the oil reservoir with 12.8 Liter (13.5 US qt) of
oil.
Tube
Ref No.
Description
Where Used
Part No.
25W-50
Synthetic
Blend 4-Stroke
Racing Engine
Oil
Crankcase
8M0078013
10. Using an electric drill motor, manually turn the oil pump pulley
(clockwise) to prime the engine oiling system until reaching an
oil pressure of 276 kPa (40 psi).
a
7436
a -
Oil pump pulley
b -
Electric drill motor
c -
Clockwise direction of electric drill motor
11. Add any additional oil to the reservoir to bring the oil level to
approximately 25.4 mm (1 in.) below the bottom of the reservoir
split ring.
12. Install the oil pump belt and tighten the pump mounting
fasteners. Tension the oil pump belt to
Specifications.
Description
N
lb.
Oil pump belt
When the belt can be twisted with
two fingers approximately 1/4
turn.
NOTE: Engine oil level in the reservoir will increase as the engine oil
temperature increases.
45706
a
b
c