Mercury/Mariner 25 MARATHON Manual Download | Manualshive

Page: 11 / 130

background image

Section 1 - Warranty

90-8M0074347

eng

OCTOBER 2012

Page 3

There is no charge for this service.
For products purchased outside the United States and Canada, contact the distributor in your country, or the Marine Power

Service Center closest to you.

Mercury Installation Quality Certification Program

15502

Mercury MerCruiser products installed by a Mercury Installation Quality Certified Manufacturer are Installation Quality Certified

products and may receive an additional one (1) year of limited warranty coverage.
The Installation Quality Certification program was developed to recognize MerCruiser boatbuilder customers who have

achieved higher manufacturing standards. It is the first and only comprehensive manufacturer‑installation certification program

in the industry.
The program has three goals:
1. To enhance overall product quality.
2. To improve the boat ownership experience.
3. To enhance overall customer satisfaction.
The certification process is designed to review all facets of manufacturing and engine installation. The program is composed of

design, manufacturing, and installation review stages with which builders must comply. Certification applies leading‑edge

methodologies to create:
•

Efficiencies and best practices specific to engine installation.

•

World‑class assembly and component specifications.

•

Efficient installation processes.

•

Industry standard end‑of‑line test procedures.

Boatbuilders that successfully complete the program and meet all certification requirements earn Installation Quality System

Certified Manufacturer status and receive an additional one (1) year of Mercury limited factory warranty coverage on all

MerCruiser‑powered boats that are registered on and after the boatbuilder's certification date for all worldwide registrations.
Mercury has designated a section of our website to promote the Installation Quality Certification Program and communicate its

benefits to consumers. For a current list of MerCruiser‑powered boat brands that have earned Installation Quality Certification,

visit

http://www.mercurymarine.com/service‑and‑support/customer‑support/warranty/

Mercury Product Protection Plan: United States and Canada

IMPORTANT: Certain performance products, triple engine installations, and commercial applications are excluded from the

Mercury Product Protection Plan program.
The Mercury Product Protection Plan provides coverage against unexpected mechanical and electrical breakdowns that may

occur beyond the standard limited warranty. The plan may be purchased up to twelve months after the original engine

registration date and is available with terms ranging from one to five years.
The optional Mercury Product Protection Plan is the only factory authorized extended warranty plan available for your engine.
See your participating Mercury MerCruiser dealer for complete program details.

«
...
9
10
11
12
13
...
»

Summary of Contents for 25 MARATHON



































































































































Reviews:

No comments

Related manuals for 25 MARATHON

Brand: Farymann Diesel Pages: 34

Brand: WPT POWER Pages: 39

Brand: B&S Pages: 26

Brand: Briggs & Stratton Pages: 20

Brand: Ebmpapst Pages: 18

Brand: ebm-papst Pages: 11

Brand: TCF Pages: 16

Brand: Volvo Pages: 25

Brand: NACIONAL MOTOR Pages: 43

Brand: Farymann Diesel Pages: 110

Brand: Honda Pages: 47

V-Green Green Choice

Brand: A.O. Smith Pages: 8

Brand: Grundfos Pages: 24

Brand: Mitsubishi Pages: 330

Brand: Mitsubishi Pages: 30

Brand: Mitsubishi Pages: 31

Brand: Mitsubishi Pages: 204

Brand: Mack Pages: 536

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands