(16) BOSS-II Floor Machine
BOSS-II Floor Machine (5)
1.0 Safety Instructions
READ THIS MANUAL BEFORE USING FLOOR MACHINE. KNOW THE
PROPER OPERATION, CORRECT APPLICATIONS AND THE LIMITATIONS OF
THIS EQUIPMENT
BEFORE
USE.
Reduce the Risk of Fire, Electric Shock or
Injury:
• This floor machine is designed for indoor use only. Do
not use outdoors. Do not expose to rain.
• Do not wash the motor with flowing water. If the motor
gets wet, seek authorized service.
• Keep the vents on this air-cooled motor free from debris.
Do not operate with the motor covered or with vents
blocked. Do not use this machine as a floor sander.
• Never operate this floor machine near flammable dusts,
liquids or vapors. Never use flammable solvents as a
cleaning agent. Engine sparks and operating heat can
cause fire.
• Never handle electrical equipment with wet hands. Never
operate this floor machine with bare feet.
• Unplug the floor machine when not in use and when
servicing the equipment. To unplug, grasp the plug not
the cord.
• Do not operate a floor machine with damaged handle
controls, cord or plug. If the equipment is not performing
properly, seek repair from a qualified service supplier.
• This floor machine is constructed with electrical
grounding at the plug. Operate only when connected to a
properly grounded outlet. See section 1.2 for grounding
details.
• Prevent electrical cord abuse. Do not close a door
upon the cord, drive equipment over it, or run the floor
machine over it. Do not expose the cord to hot surfaces.
Do not lift, pull or carry this floor machine by the cord.
• Never operate the floor machine over sharp objects that
can be thrown out and harm the operator and damage
the floor. Sweep hard floors before scrubbing or buffing.
Vacuum clean carpets before shampooing or bonnet
cleaning.
• Train your staff in proper use of this floor machine.
Notes:
