mcr S-THERM smoke exhaust vents: C, E, NG-A. OPERATION AND MAINTENANCE MANUAL
Page 16 of 41
The installation process of the temporary net should begin by attaching the temporary net console to
each of the centre consoles with a single 6.3x19 self-drilling screw:
Fig. 24 Temporary net console attached to the standard net console.
Then apply the temporary net to the temporary consoles, close the temporary net consoles and attach
each console to the standard console with two more 6.3x19 self-drilling screws:
Fig. 25 Mounting the temporary net on the consoles.
Fig. 26 Folding base fully protected with standard nets and a temporary net.
NOTE: Before mounting the opening system, remove the temporary net and temporary consoles by
following the steps described above in reverse order!
1
1. Standard net console
2. Temporary net console
3. Self-drilling screw 6.3x19
2
3
