OPERATION
#1
On/Off Switch controls lights.
#2
Controls the upper tubular heating element(s) and lower heating shelf.
#3
Illuminated Pilot Light indicates that tubular heating element(s) are on.
#4 Controls
warming
shelf.
#5
Illuminated Pilot Light indicates that the shelf is on.
The factory recommends setting the heat control knobs (2 & 4) between the numbers four (4) and six (6) on the
control panel depending on the ambient temperature.
CLEANING
Exterior Cleaning
1. The stainless steel exterior surface of your unit may be cleaned with a soft, damp, soapy cloth or sponge. Be
careful not to scratch the surface while cleaning.
NOTE: Care should be taken to insure that water and/or
cleaning solutions do not access the control features located on the base/shelf
.
2. Rinse with clean, damp, soft cloth or sponge.
Alternate Method: Clean the exterior (sides and top) of unit using a stainless steel cleaner/polish.
NOTE: Do not
use stainless steel cleaner on the base/shelf as it is made of aluminum
. For aluminum, simply use warm, soapy
water. Follow manufactures instructions.
LO
1 2
3
4
5
LIGHTS
OFF
ON
OFF
HI
6
5
4
3
2
TOP
HEAT
LO
OFF
HI
6
5
4
3
2
BOTTOM
HEAT
DANGER:
!
Disconnect power supply before servicing or cleaning this unit. Safeguard power so it
cannot be accidentally restored. Failure to do so could result in serious injury.