Package contents
metal base blue, 2 pieces
two-part adjustable posts, 2 pieces
reinforcing bars, 4 pieces
cover nuts for fixing posts, 8 pieces
short bolts for attaching reinforcing bars, 4 pieces
screw with wing nut for fixing reinforcing bars,2 pieces
long screws for fixing wheels, 4 pieces
locking screw, 2 pieces
winding mechanism handle, 1 piece
1. Unscrew all screws and cover nuts on the blue base.
2. Open the blue base and remove the fittings and accessories.
3. Using long screws, screw the wheels to the axis into the threaded hole in the sides of the
bases.
4. Insert the minimum recommended load inside the blue boxes, at least 60 kgs into each
box.The load is not part of the package.
We recommend inserting, for example, bags with sand or other loose material.
It is not possible to use the posts without an inserted load, as they would not be stable
enough. Before starting thegame, make sure that the posts are sufficiently secured and
cannot tip over!
After closing the base, place the lower part of the posts on the threaded studs and fasten
them with the cover nuts. Screw a metal roller with a locking pin and a screw into the post
hole.
Install the 2 reinforcing bars between the post and the base box. First, measure the distance
between the base and the post and unscrew the terminals accordingly. Attach the
reinforcing bars to the post with a screw and a wing nut. Attach them to the stand with two
short screws. Bend the strut ends slightly to adjust by bending the slope at the joint.
Assembly instructions
Warning
