Contempo Lamps Service Manual
8
MERCO SAVORY TRACK LIGHTING INSTRUCTIONS
These instructions are for the proper installation of all Halo Track Lighting fixtures. There are several
different configurations of the Merco Savory track lighting fixtures. All mount to the Halo track in the
same manner as described below.
This fixture is for use with Halo Lighting’s L-Series track system only.
The track plug attaches electrically and mechanically anywhere along the Halo Power-Trac. A two-
position conductor allows use in single circuit track and either circuit of two-circuit track. There are
three terminals on the end of each adapter. To insure proper grounding, locate the side of the
adapter with two terminals and locate side of the track that has two recessed power conductors.
Insert adapter into the track and rotate the proper direction to have the two terminals match up. The
adapter should be inserted into the track and rotated 90° until the locking tab snap into place. To
remove the fixture, press in the locking tab while rotating the adapter 90°.
NOTE: If unit does not operate upon installation, push in tab and rotate fixture 180° to insure adapter
has the proper connection.
CAUTION:
To reduce the risk of burning during re-lamping, remove the entire unit from the track.
!
