20293367w Rev 08/22
2 of 2
The life science business of Merck operates
as MilliporeSigma in the U.S. and Canada.
Merck, Millipore, Immobilon, and Sigma-Aldrich are trademarks of
Merck KGaA, Darmstadt, Germany or its affiliates. All other trademarks
are the property of their respective owners. Detailed information on
trademarks is available via publicly accessible resources.
© 2022 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved.
7. The cover has grooves to position the
scissors for cutting membrane to fit standard
mini (7.8 × 8.5 cm) or midi (8.5 × 13.5 cm) gels.
With the membrane flat against the cover, position
scissors in one of the cover grooves to cut the
desired length.
8. After cutting, partially retract the membrane back
into the dispenser, leaving just enough at the slot
to pull it forward.
Retract
membrane
Notice
We provide information and advice to our customers
on application technologies and regulatory matters to
the best of our knowledge and ability, but without
obligation or liability. Existing laws and regulations are
to be observed in all cases by our customers. This also
applies in respect to any rights of third parties. Our
information and advice do not relieve our customers
of their own responsibility for checking the suitability
of our products for the envisaged purpose.
The information in this document is subject to change
without notice and should not be construed as a
commitment by the manufacturing or selling entity,
or an affiliate. We assume no responsibility for any
errors that may appear in this document.
Technical Assistance
Visit the tech service page on our web site at
.
Terms and Conditions of Sale
Warranty, use restrictions, and other conditions of sale
may be found at
.
Contact Information
For the location of the office nearest you, go to
