- 11 -
- 10 -
4.4.
Attach the needle
•
Screw the threaded tip of the GONAL-f pre-filled pen into the outer needle cap until you feel a light
resistance.
Warning:
Do not attach the needle too tightly; the needle could be difficult to remove after the injection.
•
Remove the outer needle cap by pulling it gently.
Put it aside for later use.
•
Hold the GONAL-f pre-filled pen with the needle pointing upward.
•
Carefully remove and discard the green inner shield.
4.5.
Look closely at the tip of the needle for tiny drop(s) of fluid
•
If you see a tiny drop(s) of fluid proceed
to Section 5: Setting
the dose prescribed by your doctor.
Warning:
ONLY
check for drop(s) the
FIRST TIME
you use a new
GONAL-f pre-filled pen to remove air in the system.
CAUTION:
If you do not see a tiny drop(s) at or near the needle tip the first time you use a new pen, you must
perform the steps on the next page.
