P 8
Please retain product label and instructions for future reference
Step 11
(See Pre-Assembly)
Parts needed - No. 9 QTY 1
No. 15 QTY 1
No. 17 QTY 1
No. 21 QTY 2
No. 22 QTY 1
Following the same method
outlined in
Pre-Assembly
, lay the
remaining boards (
No’s. 9, 15,
17, 21 & 22
) onto the assembly
to bring the board level above
the window and doors.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Step 10
(See Pre-Assembly)
Parts needed - No. 7 QTY 1
Make the assembly level by
adding another right hand
board
(No. 7)
as shown in the
diagram.
*Ensure to stagger the screws
so as not to collide with the
previous screw.
22
21
7
19
21
Step 12
(See Pre-Assembly
Parts needed - No. 8 QTY 1
No.14 QTY 1
No. 18 QTY 1
No. 19 QTY 1
No. 21 QTY 2
Following the same method
outlined in
Pre-Assembly
, lay
the final boards (
No’s. 8, 14,
18, 19 & 21
) onto the assembly
to bring the board level x2
boards above the window and
doors.
*Ensure that the boards are
level and flush with each
other as you lay each one.
17
9
15
14
18
8
Step 13
(See Pre-Assembly
Parts needed - No. 51 QTY 1
Before beginning the roof
assembly, place the gable
(No.
51)
onto the inside wall as
shown in the diagram. This will
support the roof.
Fix using 2x90mm screws.
2x90mm Screws
Pre drill
hole
90mm
screw
51
21
21
